PerMix North America
Since 1954 PerMix has been leading the industry in Plow Mixer technology, manufacturing Vale Added Engineered products that outperform our competitors, offer the best warranty, while also guaranteeing the best price.
PerMix Continuous Vacuum Deaerator Introduction
Processing of liquid products often incorporates air and unwanted gases into the product. These gases normally cause problems such as oxidation, discoloration, inconsistency, bad smell and filling difficulties. The PerMix PDA series Continuous Vacuum Deaerator is a totally compact sanitary device designed for the continuous automatic removal of air or other occluded gases from any type of liquid or paste, by means of vacuum.
PerMix Vacuum Deaerators can handle numerous processes including (but not limited) the manufacture of food products, cosmetics and chemicals amongst others, need to avoid air oxidation to ensure a correct preservation or application. End products can be mentioned, such as sauces, fruit pulp, cosmetic creams, syrups, PVC dispersions, lubricants, car polish, shower gels, paraffin and penicillin emulsions, ice creams, adhesives, etc.
The PerMix PDA series Continuous Vacuum Deaerator starts to work by forming a very high vacuum in the chamber up to -0.95barG, and then to load the product.
The product can be even sucked into the chamber by the vacuum if it is with low/middle viscosity, or be transferred with a pump. The deaeration begins with the formation of a fine layer of product, which is distributed firstly on a high speed centrifugal disc with dismountable sieves surrounding it. Depending on the product character and/or processing requirements, the sieve number can be from 0 to 3, with
the sieve hole size also to be decided, typically from 1-3mm. The creation of fine layer under vacuum makes the air bubbles in the product burst and the product is then deaerated. Besides, during its passing through the sieve holes, the product particle is subject to shearing, folding, particle size reduction, etc, which results in even better separation of air from product particles. Away from the
centrifugal disc, the product is then sprinkled in radial direction toward the chamber wall. It then stops there, flows by gravity, and forms another layer all over the wall below the centrifugal disc, and finally arrives at the discharge port, and discharged by means of a
positive displacement pump (screw pump, diaphragm pump or the other type).
- Fully automated for “stand alone” operation with PLC control cabinet
- Explosion-proof construction for flammable product
- Pneumatic or electrical lifting or lowering of the top cover
- Speed of distributor plate infinitely adjustable
- Special level control for sensitive products
- Various vacuum systems available
- Higher pressure discharge pump
- Sanitary designs
- Jacket for heating or cooling
- Special materials of construction
- Portable design/on casters
- Total power (kW) (*) includes all the motors of the machine, e.g. distribution disc, vacuum pump, discharge pump, etc.’
- All specifications and illustrations are as accurate as is reasonably possible, but they are not binding.
- PerMix reserves the right to modify the design without notice.
PerMix PDA series Vacuum Deaerators can be used extensively in many applications including but not limited to:
Baby Food, Chocolate Fillings, Chocolate Frostings, Creams, Dessert Toppings, Fruit Concentrates, Ketchup, Mayonnaise, Mustard Paste, Salad Dressings, Sauces
Adhesives, Glues, Ink Dispersions, Detergents, Plastics, Slurries, Oils, Paint Dispersions, Varnishes
• Pharma & Cosmetics
Creams, Emulsions, Gels, Lotions, Ointments, Shampoo, Toothpaste