Best in Innovation • Best In Performance • Best In Quality • Best In Price • Best In Warranty
PerMix Paddle Mixers lead the industry in technology, performance, and value.
PerMix Paddle Mixers are available in four types, our standard Horizontal Paddle Mixers, Horizontal Paddle Mixer / Dryers, Twin Shaft Paddle Mixers, also called Fluidized Zone Mixers & our new Vertical Paddle Mixers called our PAM Series.
PerMix Paddle Mixer models are high-efficiency mixers that provide a no/low shear effect on ingredients why aggressively mixing. Paddle mixers are one of the most diverse mixers available as they can be used for blending dry, powdery, granular, fibrous, and moist solids and liquids together with pasty products up to and including highly viscous products. For a more aggressive mixing type with better shearing and resizing effect, see our Plow Mixer models
Along with being very diverse because of the products/ingredients they can mix, they are also very versatile in regards to different processes needed, such as compounding, fine mixing, dispersing, suspending, emulsifying, deaerating, tempering, accelerating chemical or physical reactions, granulating, breaking down agglomerating & more…
PerMix paddle mixers are available in numerous configurations, including:
• Horizontal Paddle Mixers & Mixers/Dryers
• Vertical Paddle Mixers & Mixers/Dryers
• Dual & Single Shaft Paddle Mixers (Fluidized Zone Mixers)
The PerMix Paddle Mixers consist of one electrical motor, one reduction gear, coupling, and shaft with an agitation that has paddle liked shaped attachments that collide with ingredients causing a multi-directional response that mixes products quickly.
The shaft is sealed with bush & PTFE gland housing at both ends, with other options available. Materials are loaded from top side, and the discharge is located at the bottom side in the center or end, depending on production needs, either batch type or continuous.
The discharge height can be adjusted as per requirement so that material gets discharged into the container below it without floating dust.
PerMix Paddle Mixers consists of one electrical motor, one gearbox, and a shaft with plows located in a O-shaped vessel. The plows are designed in such a way that the powder materials are guided to move from the two ends of vessel to the center, and meanwhile from center to both ends, and over, until batch is mixed thoroughly, in addition
Paddle Mixers also lift the ingredients into the air, mixingthem in a “fluidized zone” then allow them to drop back down. In such a three-dimensional way, the total powder can be mixed fast in the vessel. It asks for a short mixing time and relatively low power consumption. For out twin shaft Paddle Mixers that have twin shafts and paddle sets, there is an option for dual drives. Our Twin Shaft Paddle Mixers are also referred to as Fluidized Bed Mixers.
The PerMix Horizontal Paddle Mixer / Dryers have the same mixing principle as our Horizontal PaddleMixers but add the ability to add an external jacket that allows for heating & cooling of products inside the mixer while mixing.
The heating & cooling allows for precision control in temperatures and aids in the drying process. It can also be used to control chemical reactions that may take place during mixing. In addition to adding a jacket, the Paddle Mixer / Dryers can also be equipped with internal vacuum. Theses features all allow the PerMix Paddle Mixer / Dryers to remain versatile & efficient mixing solutions.
The PerMix Hybrid Paddle Mixer / Dryers have the same mixing principle as our Horizontal PaddleMixers & Paddle Mixer / Dryers but add the ability for the operator to change agitation type with ease, switching from paddle to plow, or even segmented ribbon.
Our Twin Shaft Paddle Mixers / Fluidized Zone Mixers are ideal for mixing ingredients of different density & particle size as the twin paddle design “flings” the ingredients in the air with such velocity the mixingis done in the air, in a gravity-free zone where density & size do not matter.
PerMix Vertical Paddle Mixers compliment to continued development of PerMix’s Vertical Mixers and has all the features of our Horizontal PaddleMixers but add the advantages of our other Vertical Mixersand have reduced footprint and a more versatile batch range as there is no minimum batch size.
Like our other Vertical Mixers, the Vertical Paddle Mixers also leave little to no residue after discharge.
Paddle Mixer Powder Mixing Configurations:
Food flavoring/additives, Sponge/cake mixes, Cosmetics, Pharmaceuticals, Cement, Powdered rubber.
Paddle Mixer Paste Mixing Configurations:
Biscuit creams, dough, PVC pastes, Car body fillers/putties, Sugar/marzipan paste, Toiletry pastes, Tile adhesives and grouts.
Paddle Mixer Mixing Of Wet Slurries:
Filter cake re-slurrying, dough, Fiberglass resin dough putty. Wet granulation, liquid coating of powders and granules, fat and oil incorporation, vacuum drying, hot air drying.
For the latest info on customers, applications, & global installations, visit our blog or visit us on LinkedInPerMix Paddle Mixer Options.
PerMix is here to listen to your needs and provide sustainable solutions. Contact us to discover more.