PerMix Engineering Team Presents: Mixing Abrasives While Saving Space.
Ceramic materials possess such abrasive and voluminous characteristics and PerMix’s Conical Screw Mixer is the perfect choice for such an application whether in powder/slurry form. The gentle agitation mechanism imparts minimum wear making it suitable for abrasives like silicon carbide & zirconium oxide.
The Indian Ceramics Market is growing rapidly and is forecasted to grow at CAGR of 11.5% during 2020-2025. To meet the processing needs of the Indian Ceramic Market PerMix has engineered the Conical Screw Mixer.
Some of the advantages offered by Conical Screw Blender are:
-High efficiency & excellent homogeneity with lower mixing time.
-Most gentle mixing with no shearing effect
-Low heat generation, suitable for heat-sensitive products.
-No minimum volume is required.
-No sealing/bearing exposed to the product thus free of contamination by lubricating liquids.
Come see the PerMix difference
PerMix presents its PNA series Conical Screw Mixer, it is a batch mixing equipment used widely in mixing applications that require gentle mixing with minimal product distortion, minimal heat generation, and very accurate mixing homogeneity. Since it was first developed more than 60 years ago, it has been recognized as a good solution for products that are delicate, heat sensitive or tending to segregate.
Due to the reason that PerMix Conical Screw Mixer uses gravity to generate the significant downward mass flow, it saves energy compared with a horizontal mixer
These Conical Screw Mixers are also featured with no contamination to the product during the mixing, due to the fact that the shaft sealing & bearing is above the working area, thus no contact with the product.
Inside the PerMix Conical Screw Mixers, there is a cantilevered rotating screw ( or two, three screws according to the specified application) rotating by its own axle which is in parallel to/near the cone vessel.
During the operation, the mixing screw lifts the product around it from the top and then the powder falls down due to the gravity causing a convective mixing. At the same time, the screw is supported by an orbital arm and is rotating around the center of the cone-like a planetary, so that the powders in every corner of the cone can be mixed by the screw, and a 3-dimensional mixing performance occurs within the whole cone.
PerMix also provides you with various options such as:-
* Feeding & Discharge
* Screw Type
* Drive System
* Construction Material and Finish
* Spray Nozzle
* Heating/ Cooling Jacket
* Vacuum drying & de-aerating
The PerMix Conical Mixer is suitable for various applications such as:-
* Gentle mixing of free-flowing powders, pastes and slurry
* Coating of solid mass, powdery product
* Moistening of fine powders
Drying of wet powders, pastes and slurry with vacuum and liquid recovery