Fluidized Zone Mixers Archives - Industrial Mixers For All Applications

News & Updates

Category: Fluidized Zone Mixers

50 Years in Business

PerMix Fluidized Zone Mixers Cantilever Design Eliminates Confined Space Entry For Cleaning & Maintenance

Eliminate Confined Space Entry For Cleaning & Maintenance Without Increasing Floor Space With PerMix’s Cantilever Design

Since 1954 PerMix has been leading the industry with our engineering, innovation, performance, & quality, all while keeping realistic pricing that is affordable by all budgets. Our cantilever design is a testimonial of that.

PerMix’s cantilever design gives users the ability to open the end of the mixer and expose the interior completely. The cantilever design allows for the interior to be exposed without the need for overhanging pillars that competitors have that doubles the floor space needed and creates overhang obstacles. This is crucial in saving space as well as creating a safer workplace environment.

By having a cantilever design, the need for confined space entry to clean and perform maintenance is eliminated. It also decreases the time needed for maintenance, cleaning, and inspection. All things that create a perfect balance needed to increase production and decrease downtime.

And PerMix did this all without adding a huge cost to the mixer. Any of our mixers can have the cantilever design added as an option without creating a huge additional cost. Something our competitors have yet to figure out.

Come see the PerMix difference.


PerMix Single Shaft Fluidized Zone Mixers

Replace Your Ribbon Mixers With A Single Shaft Fluidized Zone Mixer Without Changing Your Current Layout Configuration & Increase Production With Ease

The Fluidized Zone Mixer is a high-performance mixer that is designed for rapidly mixing ingredients together with no/low shear effect. What makes these models so popular is they allow users with old, out-of-date, inefficient ribbon mixers, to replace them with ease without disrupting the current production layout.

The trough of the Single Shaft Fluidized Zone Mixer uses the same trough of the ribbon mixer, yet incorporates the engineering & mixing features of the fluidized mixers. This allows mixing to be completed quicker, with ease, in seconds not minutes. Increasing production without the expense or time of re-designing the production area.

Here are two recently completed Single Shaft Fluidized Zone Mixers that were recently made for a company in Missouri. These mixers we designed according to their needs, which includes that large unit, a 10,000-liter unit, to be engineered for the top of the mixer to be a structural working platform. The smaller unit is a 1,500 liter unit. Both units are designed to mix a batch in 30-90 seconds.

Come see the PerMix difference

#permix #powdermixing #powdermixers #mixers #mixing #fluidizedzonemixers #foodmanufacturing #pharmaceuticalmanufacturing #chemicalmanufacturing #innovation

PerMix Fluidized Zone Mixers Assists Whole Foods Make The Muffins

PerMix Perfects Mixing For Bakeries

PerMix Single Shaft Fluidized Zone Mixers are perfect for rapidly mixing products together. This PFBS-200 was recently built for an artisan-type bakery that makes muffins for Whole Foods. The mixer quickly mixes the ingredients together in 30-60 seconds while be gentle enough so that the ingredients are not sheared at all. After the ingredients are mixed, the mixture then goes over to packaging and the product is shipped out where it is mixed and baked at the local stores.

Come see the PerMix difference & experience what our Fluidized Zone Mixers can do for your applications


What Make A Fluidized Zone Mixer The Wise Choice Over A Ribbon Mixer? Mixing Time & Efficiency

Ribbon mixers have been used for years when it comes to mixing powders. They are a no/low shear mixer that has been the industry standard and a “default” mixer so many have used for mixing. The issue is it is an inefficient mixer. It takes a long time to mix and uses a lot of energy and when we need production while minimizing resources, it does not make sense and takes a long time to get an ROI out of it. Fluidized Zone Mixers are the wise choice. The Fluidized Zone Mixers achieve a mixing time in 30-60 seconds, where a ribbon mixer will take 8-10 minutes, all while maintaining the no/low shear effect. Imagine doing 3-6 batches in the same time it takes a ribbon mixer to do one. Imagine the increase in production and the quick return on investment (ROI). Imagine the energy savings as well as the labor savings.

Here is a video of a Double Shaft Fluidized Zone Mixer mixing & discharging. Note that after discharge, the bombay style doors also allow for a full and complete discharge of product. There is no residue left behind, another feature that is unique to the mixer over the ribbon mixer.

Come see the PerMix difference.


Single Shaft Fluidized Zone Mixers Are Designed To Increase Production By Replacing Your Ribbon Mixer Without Changing Footprint Of Production Area

PerMix has been leading the industry since 1954. Our ability to combine innovation, performance, quality, &. price make us the most disruptive brand in the industry, winning the hearts & smiles of our customers.

Recently we had a customer that needed to increase their production but could not afford the increased production area. They turned to PerMix to provide these two Single Shaft Fluidized Zone Mixers to reduce mixing times from their current ribbon mixers of 10-12 minutes to 30-60 seconds. The Single Shaft Fluidized Zone Mixers utilize the same U-trough that the ribbon mixer does, however it provides all the advantages of a Fluidized Zone Mixer. This solution allows for a simple solution to the need to increase production and minimize installation time.

Come see the PerMix difference